Basic Operation
How to Connect the Mouse with a Computer
Wired Connection
1. Take out the USB A to USB-C cable in the package and connect the mouse with your
2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power
On without LED
3. The computer will recognize and configure the mouse automatically
4. The mouse will be ready for use when the configuration is finished. The LED of the LOGO and the edge will light on when the power switch on the bottom of the mouse was turned to Power On with LED ON
5. The mouse is under recharging whatever the power switch is put to On with or without LED ON. The scroll wheel will light up in red. The LED will turn to green when the battery is fully recharged
Wireless Connection
1. Take out the nano USB receiver in the package and plug it into any available USB port on your computer.
2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power On without LED
3. The computer will recognize and configure the mouse automatically
4. The mouse will be ready for use when the configuration is finished. The LED of the LOGO and the lower edge will light on then if the power switch on the bottom of the mouse to Power On with LED ON
5. The scroll wheel will flash in red when the battery is low. Please recharge the mouse in time The two buttons on the top of mouse are set to DPI+/DPI- as default. Please press the o buttons to change DPI value. The scroll wheel light breathes in colors as.Red(500dpn, Blue(1000dpi), Green(2000dpi), Purple(3000dpi), Yellow(4000dpi)
How to Select the Polling Rate Press the button on the bottom of mouse to change the polling rate of the mouse. The scroll wheel light will flash in white. The flashing times shows the polling rate value as
one time for 125Hz, two times for 250Hz, three times for 500Hz, four times for 1000Hz
How to Select the Light Effect
Press the Forward and Middle buttons together repeatedly to change the backlight
effect. The effect changes in the following sequence: Mixing color flowing, purple ligi
Seven color cycling while breathing, Mixing color tracing, Neon light, Mixing color light
on, Flashing in purple and green, Starry night twinkling, Seven colors waving, Off.
How to Reconnect the Mouse with the USB Receiver
The mouse may lost connection with the USB receiver for some occasional reasons such as strong magnet, violent vibration. So you may need to reconnect the mouse with the USB receiver, In this case, unplug the receiver and plug it back again. Slide the power switch on the bottom of the mouse to ON, press and hold the Left, Middle and Right button at the same time till the scroll wheel lights up and flashes. It will flash for a few seconds and then change back to the previous light effect. The reconnection will becompleted and you can use the mouse then
Battery: 700 mAh Rechargeable Lithium Polymer batteries
DUE TO BRAND UPGRADES THE PACKAGE MAY NOT BE THE SAME AS THE
PICTURE, WHICHEVER IS THE REAL THING;
THANK YOU FOR YOUR UNDERSTANDING AND SUPPORT
Real customer reviews