Z1，Z2，mini， All three devices support open flame heating and induction cooker heating (the manufacturer recommends induction cooker heating). The structure of water vapor separation makes the steam very vigorous and drier. When the steam pressure exceeds about 2 bar, it automatically releases pressure and has high safety. (2 safety valves, the safety value of the large safety relief valve is ≤ 2.5 bar, and the safety value of the small safety relief valve is ≤ 4 bar)
Difference between Z1 and Z2:
Z2 has an additional external interface compared to Z1, making it convenient to connect with our other two coffee machines.
In terms of appearance size, boiler, capacity, and steam dryness, there is no difference between the two.
Z1 and Z2 suggest adding water ≤ 600ml.
Difference between MINI and Z1:
Mini is a scaled down version of Z1, which is easy to put in a portable case and take outdoors. Mini recommends adding water ≤ 260ML, which can support the whipping of 4-5 cups of continuous milk foam.
Z1， A pure milk frother with a body capacity that can support ≤ 8 cups of continuous milk frothing.
Z2， It is an upgraded version based on Z1, supporting the connection of two coffee machines from our company, so that the steam and hot water generated by Z2 heating can be transported to the connected machine chamber through the connecting pipe (if it needs to be linked with the coffee machine, the water volume can be increased to half of the glass pipe).
Precautions for a milk frother coffee machine:
1. Please use purified water.
2. Before frothing, empty spray for about 3 seconds to spray condensed water (note to use a latte or cup to connect), then close the steam valve to ensure that the pressure rises to 1.5-2 bar again before frothing can be done normally.
3. When making milk foam, keep the heat source on and do not stop heating.
4. Only the handle and steam pipe anti scald cover can be touched, and the whole machine is scalded. Pay attention to safety and prevent burns.
5. [Key point] Do not adjust the pressure relief valve without authorization.
6. [Key point] When the pressure is greater than 2.5 bar and the pressure relief valve is not working yet, please turn off the heating source.
Product Name: Coffee Milk Frother
Model: IT-CMF700
Use of pressure: 1-2.5Bar
Chamber capacity: 700ml
N.W.: 3kg
Gas heating or Induction cooking heating
Heat and pressurize to convert water vapor into dry steam.
The material of the steam chamber is quartz glass for aerospace purposes.
High temperature resistant丨High pressure resistant丨Corrosion resistant
Heating
Lightly twist the water inlet knob to fill 700ml of water to heat, tighten the cork to prevent water spray.
Milk Foam
Check the pressure gauge, the needle to the red zone, lightly twist the steam valve, you can froth milk.
Note: When the pointer points to 0.2 pressure relief valve starts to work, accompanied by steam emitting, if the pressure relief valve does not work, please turn off the fire source in time.
Real customer reviews