4 in 1 CCTV Tester(Not Support IP Cameras)
IV8W
●TVI camera test: HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.
●AHD camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When AHD signal input, the tester will display the AHD camera image.
●CVI camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP. When CVI signal input, the tester will display the CVI camera image.
●CVBS: PAL/NTSC, 960H Camera, 800tvl/1000tvl/1 200tvl analog camera
●Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.
●UTP cable test: Display UTP cable connection status, cable type and the sequence of wires as well as read the number of the test box.
●VGA/HDMI input: Support VGA/HDMI 1.1 Compliant Digital input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode.
IV5
I5V-8MP CCTV tester , a 5 Inch HD Screen resolution 800*480 camera tester,Support 8MP AHD camera test +8MP TVI camera test+ 8MP CVI camera test + CVBS Video camera test ,UTC (HD coaxial control,BNC coaxial control PTZ,But can’t call the camera menu information )and RS485 and UTP .
Tips
Tips
●To avoid the battery can’t charge next time. Don’t recharge it until the battery was completely used
●This tester NOT supports IP Camera
●The battery is protected by a film, please remove the film to use this tester
Troubleshoots
●IP camera can not be tested.
This tester not supports any IP cameras testing, it can only be used to test analog cameras.
●The tester can not produce pictures.
When the device is switched to CVI mode, only connected to CVI camera can it produce pictures. If the camera is other TVI / AHD signal camera, the mode should be switched to TVI / AHD signal correspondingly, so that the connected camera can produce pictures but not flicker.
●Must this be plugged in, in order to turn on or does the batteries need to be charged?
This tester is built-in battery, as long as the battery power is sufficient, you can turn it on normally, if not, that means that the battery power has been consumed, you need charge it, fully charge it and then you can unplug the power supply to use.
●HDMI isn’t recognized.
If HDMI is used as the display input, it can only be connected to the NVR or DVR which with an input signal of HDMI. If HDMI is a signal output, it needs to be connected to the display or TV.
After-sales
If you have any questions about the product, you can contact our after-sales team.
Real customer reviews